Donate SIGN UP

Why can't I go fast ?

Avatar Image
FastBarry | 15:57 Tue 29th Mar 2005 | Motoring
4 Answers

This is a boat engine problem, the engine is a volvo-penta 431A (AQ205) V6 4.3L.

Last time out was end of last year in October when everything was OK.

The problem is I took it out for it's first run this year over Easter and couldn't get past 2000rpm, it just kept cutting out. Seemed fine while idling at 1000 - 1500rpm. Just wouldn't accelerate. What's wrong, any ideas out there.

Damp, electrics, fuel. ?

Gravatar

Answers

1 to 4 of 4rss feed

Best Answer

No best answer has yet been selected by FastBarry. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
-- answer removed --
Question Author
mdoo98 thanks, this is what it is sounding like. I have asked a few boating friends and they are all saying water in the fuel. There was fuel left in the tank at the end of last season so I will drain the system and start again with fresh.
-- answer removed --
Question Author
mdoo98, Hi, thanks for your advice. I had a look yesterday and cleaned the contacts in the distributor, plug leads etc and found them to be quite clean. I have put some fuel preserver in the tank along with some Dry Gas which absorbs moisture in the fuel. I then removed the water seperator/filter and it was absolutely disgustingly filthy, looks like it hadn't been serviced for years ( Only had the boat for a year ). New filter now on order from boat yard stores. Hopefully that will do the trick.

1 to 4 of 4rss feed

Do you know the answer?

Why can't I go fast ?

Answer Question >>