Donate SIGN UP
Home > Home & Garden > DIY > Radiators

Radiators

Avatar Image
lindylou16 | 15:21 Fri 26th Feb 2010 | DIY
4 Answers
Is it possible to fit a 1600 radiator where a 1700 radiator was without cutting the existing pipework.
prev sticky marks on carpet
  
next Hard to push toilet button
Gravatar

Answers

1 to 4 of 4rss feed

Best Answer

No best answer has yet been selected by lindylou16. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Avatar Image Vagrant
Cut? don't you mean extend?

These might help:

http://www.screwfix.c...alve-Tail-Compression

http://www.screwfix.c...Valve-Tail-Union-Type
15:26 Fri 26th Feb 2010
Avatar Image lindylou16
Question Author
The rad is on the wall and pipes from underneath and the new rad is 100mm shorter. Can i get a fitting to fit the rad inlet and connect to the existing rad valve 100mm away Hope this makes sense
15:49 Fri 26th Feb 2010
Avatar Image Vagrant
The adjustable tails give 50mm - one each side gives 100 - so just about possible.
16:32 Fri 26th Feb 2010
Avatar Image lindylou16
Question Author
Thank you
20:19 Fri 26th Feb 2010

1 to 4 of 4rss feed

Do you know the answer?

Radiators

Answer Question >>