How To Drill & Tap a Thread

marlonhenry7 | 18:42 Mon 10th Mar 2008 | Interiors

3 Answers

How To Drill & Tap a Thread ?

Cleaning roman blinds

Central heating problem

Answers

1 to 3 of 3

Best Answer

No best answer has yet been selected by marlonhenry7. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

raysparx1

Well you will need a tap & dye set to do this it is very easy.

have alook at link, maplin or any diy store sell them

http://www.maplin.co.uk/Module.aspx?ModuleNo=3 0641&doy=10m3&C=SO&U=strat15

raysparx1

And heres how to do it, good luck, Ray

http://www.wsavts.org/machine/machine3.htm

tufty7

chamfer the rod screw part and force the die onto it , two forward and one back using a cutting grease or oil will do , for the tap, get it started and again two forward and one backwards, keep them both straight and blow away the swarf that comes off it , try not to snap the tap in the hole as they are a devil to remove and you have to shatter it to remove it .best of luck ..

1 to 3 of 3

Do you know the answer?