Fibre Optic Christmas Tree Not Working

islasmum | 16:21 Sat 16th Dec 2017 | Home & Garden

6 Answers

We have a small fibre optic Christmas tree which we've used for several years, but it has decided not to work this year. I've replaced the bulb in it, but the spindle that rotates the light disc doesn't seem to be working. Is there anything I can do, or is it dead? Thanks for any help.

Replacement Windows

Stain Removal On Material

Answers

1 to 6 of 6

Best Answer

No best answer has yet been selected by islasmum. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

bhg481

I don't know much about fibre-optic trees so I'm assuming the spindle rotates using rising air due to heat from the bulb. You haven't replaced a conventional bulb with a LED bulb, have you? Does the bulb light?

islasmum

Question Author

No, I've replaced the bulb with the same as it had in it. And yes, the bulb does light, just the spindle with the light disc doesn't rotate.

bhg481

Can you get to the spindle to give it a start? Even better, can you get it off and give it a good clean?

Zacs-Master

Try giving it a spray with WD40 (other electrical lubricative products are available).

islasmum

Question Author

I'll try unscrewing the little motor and see what's inside. Will come back soon!

islasmum

Question Author

Have investigated the little motor and it is a sealed unit. Cannot get into it so WD40 wouldnt work either. I think that it will have to pretend to be an ordinary Christmas tree this year! Thank you for your suggestions and Merry Christmas to you!

1 to 6 of 6

Do you know the answer?