pulley

Were can I obtain a washing line pulley? An elderly lady nearby has difficulty pulling her line up when hanging sheets etc preferably one that can be fixed to a wall. she is a bit old fashioned and do not like the rotary ones
20:13 Fri 06th Jul 2012
 
Best Answer


No best answer has yet been selected by bill107. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

1 to 6 of 6

And agricultural store or a good hardware store.
If you have any decent hardware shops they should have them. They should certainly have the ironmongery, you might have to get your own wood.
A local odd-job man might know. You will need someone to install it anyway.
I don't much care for the rotary ones either, but I've never considered them old fashioned, just the quality solution.

I investigated using a pulley system when my line broke about a year ago but gave it up as, without instructions, it looked too complex to be bothered with. The way I saw it one would need more than one pully to convert the amount of power you needed to pull the line into a longer length of pull instead, with at least one pulley unfixed/loose. But maybe that's my lack of experience. With just the one pulley I do wonder if pulling the line on a single pulley system is really that easier than pushing the line up with a prop.

1 to 6 of 6

Related Questions

Hi I'm struggling on the last few questions. Any help much appreciated! 32A)In horology a type of pulley or wheel in old watches and clocks, also a large headed match for use in outdoor conditions? F...
Hello good people. I'm going to rig up a dynamo on a bench to be driven by my drill. I was going to take the pulley off of the dynamo and put the shaft straight into my drill chuck but I'm thinking...
Hi,can anyone tell me if the crankshaft pulley on 306 2.0 hdi is the same as the 206 and 406 hdi's. I have just had to replace mine but now the engine management light has come on. Coincidence or is...
Avatar Image
xud
Th pulley is making horrible noises on my 2001 XantIa HDi (engine DW10). The rubber has perished. Can a pulley off an older pre-HDi engine be fitted? Same diameter, same fitting etc A new pulley would...
What is a Pulley airer?

Latest posts