Donate SIGN UP

Tapping in heating

Avatar Image
sugmi700 | 14:07 Thu 29th Jan 2009 | DIY
5 Answers
I have a tapping sound coming from my 3 way valve. I have changed the body and head and it is still there. I have TRVs all round and the system runs with a pressure relase bypass. I can vary the sound by adjusting the TRV in my en-suite. Have any of you come accross this or do you have any idea what might be causing this?
Gravatar

Answers

1 to 5 of 5rss feed

Best Answer

No best answer has yet been selected by sugmi700. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Sorry, I have no idea. This may seem a useless response, but I just wanted to let you know that you are not being ignored. Good luck!
how loud is this sound?

quite often it can be a bit of debris in the system that is getting flushed about, esp bits of solder from the installation that have broken off.

apart from that i cant think of what it could be without hearing it.
Question Author
Noise is quiet but consistent tap at constant time interval. Now have theory that it may be 3 way valve being knocked by repetitive pressure wave from dodgy TRV?
thats a new one on me to be honest but im not saying your wrong.
Question Author
If this is a flow problem, I'm going to start from scratch, rebalance the whole system, reset the pressure release on the bypass and then see. If tap is still there then I'm going to open fully each TRV in turn and see if any one stops the problem and if that doesn;t work, I'm goind to fit a surge inhibitor by the 3 way valve. Can you think of anything else that I can try?

1 to 5 of 5rss feed

Do you know the answer?

Tapping in heating

Answer Question >>