'Boil Water' Warning After Confirmed...
News4 mins ago
flexible beading for a table edge
1 Answers
i am making a kitchen table and I need a flexible bead for round the edge to create a tidy finish. it is oval shaped and i am using an exces piece of worktop. where can i purchase this, if at all
Answers
Only 1 answer
Best Answer
No best answer has yet been selected by GOLDIELOCKS. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
Hi Goldilocks
I stumbled across your question when I was googling to find the same thing .
Four years ago I made a 37mm thick top for my desk with rounded internal and external corners thinking it would be easy to find chrome or aluminium trim to finish it off and give it an "American Diner" look. Wrong!!! As you've dicovered.
HOWEVER today, on one of my periodic attempts to solve the problem, I did come across a website for a worktop company who refer to flexible plastic edging which comes in quite a few colours which fits around even tight corners as well as laminate which would presumably be OK for your gentle oval (and they even have a picture of the American Diner aluminium). They don't sell the trim but I've emailed them to ask for details of manufacturers/suppliers. I'll post again if/when I hear from them.
Hang on in there - we might both be lucky
I stumbled across your question when I was googling to find the same thing .
Four years ago I made a 37mm thick top for my desk with rounded internal and external corners thinking it would be easy to find chrome or aluminium trim to finish it off and give it an "American Diner" look. Wrong!!! As you've dicovered.
HOWEVER today, on one of my periodic attempts to solve the problem, I did come across a website for a worktop company who refer to flexible plastic edging which comes in quite a few colours which fits around even tight corners as well as laminate which would presumably be OK for your gentle oval (and they even have a picture of the American Diner aluminium). They don't sell the trim but I've emailed them to ask for details of manufacturers/suppliers. I'll post again if/when I hear from them.
Hang on in there - we might both be lucky
Only 1 answer
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.