Donate SIGN UP

washing machine tray filling with water

Avatar Image
ffoc1 | 19:07 Thu 11th Jan 2007 | DIY
1 Answers
after doing a wash load the conditioner bit in the tray always fills up with water.
Gravatar

Answers

Only 1 answerrss feed

Best Answer

No best answer has yet been selected by ffoc1. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
You need to pull the dispenser out completely and give all the bits a very good clean.

With hot water and bleach wipe out the compartment as best as you can - I use a bottle brush.

Now, look for the jets in the roof of the compartment. These have become blocked over time. Use a suitable tool such as a cocktail stick, straw, plastic tie to get any gunge out of the holes. Be careful not to snap anything you use and get it stuck!

Use biological powder (it must be biological powder - the cheapest will do) run the machine empty on the hottest wash. This will give the machine a good clean and kill any bacteria.

The water should now run freely through your dispenser drawer.

Only 1 answerrss feed

Do you know the answer?

washing machine tray filling with water

Answer Question >>

Related Questions

Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.