Crosswords5 mins ago
DIY
I'm looking for a pillar candle mould that when you pour the wax in there's a space in the mould so it leaves a space so a tea light candle could be placed in it if that makes any sense
I have painted my bannisters white and they look lovely apart from the newel posts. I have to keep retouching them as the paint wears away (from being touched). Any way I can prevent this happening?...
I've seen an advert recently for this product and have forgotten it's name. Does this product work and if so how does it work?
It's a very long time since I did any home decorating, and I've forgotten everything I used to know. Should a brush that's been used for emulsion paint be cleaned with white spirit, or is water...
Have three concrete boundary posts separating mine and the neighbours gardens. Am looking to replace the fence by bolting on 4"fence posts, then add "D" rails and finally 6" x 6ft fence boards...
The previous owners of my house didn't do very good prep before painting the exterior rendered walls with masonary paint. Hence the window frames have unsightly paint blobs all over the upvc frames....
Dear good AB'ers As a proficient DIY'er is it possible to fit a single fitted electric oven ( Bosch Neff type ) and an electric hob straight into an oven cabinet - Built Under Oven Unit 600mm...
Unsure which forum this goes in so trying DIY. Passing my airing cupboard I heard a gurgling, which usually means I should look at the pressure gauge above the pressured container, which is above the...
Got given x2 rolls of paper off a friend for a flat feature wall i have. Never papered before so dont really understand if i should use one roll at a time or work with the two. The match says its 64cm...
I have an old Wolf electric hammer drill, the jaws of which are `stuck` wide open after I removed a large drill bit. A friend suggested tapping lightly around the chuck with a hammer, however this has...
Looking for a hard wearing paint for my wooden kitchen cupboards that will stand up to knocks etc....any suggestions out there.???
Does anybody know if anyone makes an adaptor that fits between (for example) a Dyson vacuum cleaner hose and (for example) a Gtech appliance brush or nozzle. Compatibility between hoses and...
I'm having quite a bit of work to my house and need to replace some radiators. Is this a fairly simple job that a handyman could do or is it a job for a more specialised tradesmen like a plumber?
While browsing the B&Q website I came across this page, which lists over two dozen items subject to danger warnings and product recalls. I find this quite alarming - whatever happened to rigorous...
Can anyone suggest a solution to preventing condensation from occurring on the surface of a cold water pipe....
I bought a new ceiling light which has connections for N L E only but the wires exiting the ceiling are 2 black 4 red and the two earth wires I am flummoxed to be honest. One of the red wires is live....
Hi, I fitted a Deva kitchen tap two years ago and the cold water side has started to play up. When I removed the handle I found a white nylon circular toothed cog, which sits on the supply valve,...
Ok so I need 37 sq metres of oak laminate flooring
To say time would anywhere be cheaper than B&q?
Thanks as always...
I would like dry my towels outside and then fluff them up in my dryer. Does anyone have a trick how to make it think they are wet ? I tried today and the dryer didn't even get hot. I have no dial to...
I have a two storey side extension on my house which is constructed in blockwork. My problem is that the first floor flooring joists are laid in joist hangers which then rest directly onto blockwork,...
Latest Posts
News8 mins ago
D/Ream Ban Labour From Using Their Song...
News10 mins ago
Crosswords10 mins ago
ChatterBank26 mins ago
Law31 mins ago