Donate SIGN UP

ABS light on all the time

Avatar Image
bronners | 15:58 Sun 21st Nov 2010 | Motoring
3 Answers
i have a galaxy 2.3i,which has just failed the m.o.t because the abs light stays illuminated.I had the same problem last year which turned out to be the sensor ring. All was fine until earlier this year when i had a blowout and rather foolishly drove a fair distance so i could get off the road and out of the way. This damaged the suspension strut which i had sorted, but a short time after, the abs light came on again.I have just replaced the sensor but this has not solved the problem, would anyone have any ideas as to what else the problem may be, i would be extremely grateful for any help with this one. Thanks in advance for any help.
Gravatar

Answers

1 to 3 of 3rss feed

Best Answer

No best answer has yet been selected by bronners. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Have you checked the sensor wire itself bronners?
I know of someone who had a similar problem on his Audi. Not wanting to fail the MOT – he removed the ABS lamp. Result - MOT Pass.
The sensor has it's wire attached. Recheck the connections in the wheel arch area.
It may need the error stored in the ACU wiped by WDS or a Scanner.
At the same time, it can check for any new errors.

1 to 3 of 3rss feed

Do you know the answer?

ABS light on all the time

Answer Question >>