Donate SIGN UP

Digilogic Freeview Receiver problem

Avatar Image
welshlibranr | 12:03 Sun 30th Aug 2009 | Technology
3 Answers
Hi all, I hope I'm putting this question in the correct category! the above named digibox was working fine until last night when it was turned on there was hardly any sound at all even though both the TV and digibox sound were turned to max, even more curious is the fact that the sound we are getting is not from the programme we are watching! Hope someone can help! TIA.........welsh
Gravatar

Answers

1 to 3 of 3rss feed

Best Answer

No best answer has yet been selected by welshlibranr. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
check all the connections are good - scart plugs don't always look loose even when they are
see if it works
unplug from mains - count to 20 (or better - make a cup of tea) - plug back in
see if it works
if not - run through the new setup routine.
see if it works

if still not working - hope someone else thinks of someting I've missed
Start from scratch as ACtheTROLL suggests.
Switch on TV first and make sure you have good Analogue Signal.
Switch 'ON' DigiBox and do a Full Re-Scan by accessing Menu Function. If you still cannot get a decent picture with corresponding sound I would take it back to the Retailer and ask for replacement if it is still under Guarantee.
Many of these cheaper Freeview Boxes are a pain in the neck as they are unreliable.
Question Author
Thank you both so much! it should have been obvious to check that the scart wasn't loose! that was indeed the problem! Everything's fine now, thanks again................welsh

1 to 3 of 3rss feed

Do you know the answer?

Digilogic Freeview Receiver problem

Answer Question >>

Related Questions

Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.