Donate SIGN UP

Washing Machine Is Jammed

Avatar Image
David H | 21:33 Fri 22nd Jan 2021 | How it Works
4 Answers
I recently inherited an Indesit washing machine which had been working perfectly. After moving on about the third wash the program jammed half way and kept turning the drum on and off indefinitely. It's unlikely to be a circuit board as the next few times it was fine but it's doing it again now. It also will not respond to any changes on the programmer once it's got stuck so any position the wheel is turned is not responded to. Is there any likely cause and solution to this?
Gravatar

Answers

1 to 4 of 4rss feed

Best Answer

No best answer has yet been selected by David H. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Have you looked at troubleshooting in the manual?

Question Author
Yes, just have. Either a chip (terminal, unlikely as intermittent) or a drainage problem. I'll try it with the drain in the sink tomorrow. It's some age and just been transported here plus up a staircase so may have taken a bang.
Check the filter - cleaning the filter fixes a multitude of problems.
Question Author
To update I switch the programme off after a reasonable time to be washed and rinse, then put spin on to dry it and that ends itself. Not perfect but got my clothes clean most of the time until I have to invest in a new one.

1 to 4 of 4rss feed

Do you know the answer?

Washing Machine Is Jammed

Answer Question >>