Donate SIGN UP

Cleaning Up My Old Bike

Avatar Image
Ratty2E | 10:59 Mon 18th Sep 2017 | Home & Garden
5 Answers
Just retrieved my old bike from the back of the shed where it's been languishing for a couple of years. The paintwork and wheels will be good as new with a wipe down but there are some rust spots on the handle bars. Can anyone give me a good tip to get these clean and shiny again?
Gravatar

Answers

1 to 5 of 5rss feed

Avatar Image
WD40 and a (very) gentle kitchen scourer (one of the non-stick ones) - don't scrub too hard, just work persistently at the rusty bits. Get it nice & clean and rust free & wipe dry with paper towel. Then give a final wipe with a dry cloth lubricated with just a small spray of fresh WD40 - to stop the rust returning.
11:05 Mon 18th Sep 2017
WD40 and a (very) gentle kitchen scourer (one of the non-stick ones) - don't scrub too hard, just work persistently at the rusty bits. Get it nice & clean and rust free & wipe dry with paper towel.

Then give a final wipe with a dry cloth lubricated with just a small spray of fresh WD40 - to stop the rust returning.
Combined Chrome polish and rust remover, Turtle Wax has a good one
Thank you Sunny Dave. Haven't tried it yet but have been wanting to clean my bike for ages. Will give it a go.
I used to use Brillo pads on chrome rust.
Question Author
I don't know what happened to it but I did reply on Monday.
Anyway I thanked the two posters who had replied at the time, thank you again and to the others that have posted since.
I used WD40 and a non stick scourer as that's what I had to hand and it worked a treat.

1 to 5 of 5rss feed

Do you know the answer?

Cleaning Up My Old Bike

Answer Question >>