Basin Waste Locking Nut

sandmaster | 17:02 Tue 15th Nov 2016 | DIY

4 Answers

I have just fitted a Basin Mate seal to stop a leak. My problem is I cannot tighten the black locking nut sufficiently. I have tried a Mole Wrench but it is chewing the plastic nut. Is here a special spanner for this job? My basin fittings are 32mm

Central Heating Rad Problem

Spray Paint Colours

Answers

1 to 4 of 4

Best Answer

No best answer has yet been selected by sandmaster. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

donny48

They don't want to be too tight or you can distort the seal. I always use gland pliers ( often called water pump pliers).

bookbinder

http://billstoolstore.com/plumbing/gland-pliers.html

donny48

Just like those, they are indispensable.

TWR

Have you cross threaded the Nut? retry take the plastic nut off & retry, as you have said, but it should tighten with fully extended moles.

1 to 4 of 4

Do you know the answer?