Donate SIGN UP

Printer trouble

Avatar Image
trish1234567 | 12:36 Mon 20th Sep 2010 | Technology
4 Answers
I have two printers connected to my computer both of which print and scan
perfectly. However, I have connected my husband’s printer to my computer
by usb and although it scans perfectly and goes through the motions of printing,
it won’t actually print. A blank sheet each time. I wonder if this is a drive
or a port problem. I have taken out the programme and reinserted same.
Still doesn’t print and cartridge seems ok. Any help welcome. Thanks.
Gravatar

Answers

1 to 4 of 4rss feed

Best Answer

No best answer has yet been selected by trish1234567. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
I assume you have ink in the cartridge or taken the protective strip away from it? Have you tried another cartridge?
Most printers can be made to print a test page by either holding down a combination of buttons or by holding down a certain button while tuning it on. check the manual for how to do this and try that.

(if you can't find how to print the test page post the make and model)
Question Author
Hi Squarebear. I am beginning to think the cartridge may be the trouble because although it is new, it is a compatible from Inkinablink which company has now gone bankrupt. I think maybe the inks weren’t any good and I was ripped off. I’m loathed to go and buy more inks because they may not work either.

Now Chuckie, I have tried what you recommend. However, being an older printer which used to be mine once upon a time, and it did work well then, it's not very
sophisticated, it only has four buttons and I have tried them all in rotation together. Incidentally, it is an HP X1180 which I purchased when the all-in-one printers first came out. I now swear by my HP black ink Laser Jet, the ink goes on forever.

Thanks both, if you can think of anything else ..............
You could try standing the print head part of the cartridge in 1/4" of hot water in a saucer (hot but not boiling) until the water cools and then dab the print head onto a moist paper tissue. This may unblock the print head if it has dried out at all and you will see if there is any ink flowing to the print head,
I'm assuming that you have two cartridges, one for black and the other for colour as I don't know this model.

1 to 4 of 4rss feed

Do you know the answer?

Printer trouble

Answer Question >>

Related Questions

Avatar Image
Avatar Image
Rondy
Avatar Image
zeglover
Avatar Image
Avatar Image