ChatterBank1 min ago
Printer Colours All Wrong
2 Answers
I have a kodak C310 printer and its printing all the red colours as a bright yellow. I have gone into the maintenance section and cleaned the printhead about 10 times, and it hasn't helped. I have cleaned it manually where the colour cartridge touches the printer with tissue, but this helps for one print, then it goes back to printing all reds in yellow. I've changed the cartridges. I've been using kodak colour cartridges, which are the recommended ones. I've run out of ideas to solve the problem. The online help for kodak is useless. Its quite important as our logo on all our invoices for our business is red and it looks awful. Any ideas??The printer prints black fine, just this problem with all red colours
Answers
1 to 2 of 2
Best Answer
No best answer has yet been selected by HongKongphooey. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
>>>The online help for kodak is useless
Have you uploaded the printer's diagnostic data to Kodak? If not, start here
http://
Select 'All-in-one Printers'. Follow the upload instructions and then click 'Continue'.
Have you uploaded the printer's diagnostic data to Kodak? If not, start here
http://
Select 'All-in-one Printers'. Follow the upload instructions and then click 'Continue'.
I don't know this printer but assume that it has a tri-colour cartridge?
I would suggest that you first open the door to make the cartridges available, switch the printer off and then remove the colour cartridge. Now gently clean the gold electrical contacts on both the cartridge and the printer with a small paint brush using methylated spirits.
Allow the meths to dry properly before replacing the cartridge and then try to print a few lines of RED print.
If this doesn't work, remove the cartridge again and put the cartridge print head in a 1/4 inch of hot water (not boiling) in a saucer and leave to cool.
When cool gently dab the print head with a paper tissue to check if the red ink is flowing again. Repeat the water treatment if required.
The printer's own print head cleaner uses lots of ink even if the colours are printing OK. Is it possible that the red ink has just run out??
Hope this helps.
I would suggest that you first open the door to make the cartridges available, switch the printer off and then remove the colour cartridge. Now gently clean the gold electrical contacts on both the cartridge and the printer with a small paint brush using methylated spirits.
Allow the meths to dry properly before replacing the cartridge and then try to print a few lines of RED print.
If this doesn't work, remove the cartridge again and put the cartridge print head in a 1/4 inch of hot water (not boiling) in a saucer and leave to cool.
When cool gently dab the print head with a paper tissue to check if the red ink is flowing again. Repeat the water treatment if required.
The printer's own print head cleaner uses lots of ink even if the colours are printing OK. Is it possible that the red ink has just run out??
Hope this helps.
1 to 2 of 2
