Donate SIGN UP

computers

Avatar Image
recordman | 07:17 Mon 05th Jul 2010 | Computers
6 Answers
Can someone suggest a reliable programme to fix my 'virtual memory to low' problem?
Gravatar

Answers

1 to 6 of 6rss feed

Avatar Image
Hi-Many thanks for you prompt reply. I am using XP and have followed your instructions. At risk of sounding stupid I could not find performance etc.in the control panel so I went straight to system /advanced/to the first box with setting.Sadly, from that point I got lost.Dare I ask you to guide me onto the next option? Recordman
08:43 Mon 05th Jul 2010
Hi recordman,
I am assuming you are using XP
Click on Start and then Control Panel
Click on Performance and Maintenance then System
On the Advanced tab in Perfomance click Settings
On the Advanced tab under Vitual Memory click change
Under Drive [volume label] click the drive that contains the paging file
that you want to change
Under paging file for selected drive click to Custom size check box You can enter
the amount of memory you would like to reserve for virtual memory by entering the iniial and maximum size
Click Set
When you are prompted to restart your computer click yes
SPECIAL NOTE you chose the same amount for inital and maximum size This will stop the CPU from constatly changng the paging file
HOT TIP To stop the CPU from changing the paging file set both values the same
for example 500 and 500
The value should be at least 1.5 times more than your physical RAM If your computer has 512 mb of ram then increase the virtual memory paging file to 1.5x 512 = 768
You should have at least 2GB of fixed memory installed for good performance
galeck1947
He has also asked this in Technology?

galeck1947 - and suppose his hard disk is full up?

He can make his paging file as large as he likes, but if he has no room on his hard disk.
Simply increasing the virtual memory will slow the computer down hideously if it has not got enough real RAM installed.

recordman, if you have less than 1GB of RAM installed the best answer to your question is to install more RAM in the computer.
Question Author
Hi-Many thanks for you prompt reply. I am using XP and have followed your instructions. At risk of sounding stupid I could not find performance etc.in the control panel so I went straight to system /advanced/to the first box with setting.Sadly, from that point I got lost.Dare I ask you to guide me onto the next option? Recordman
You need more RAM inside your PC. This "fix" will merely mask the problem.
Question Author
Sent to technology by mistake!!!

1 to 6 of 6rss feed

Do you know the answer?

computers

Answer Question >>