Donate SIGN UP

Electric windows

Avatar Image
c00ky83 | 22:38 Mon 11th Jun 2007 | Motoring
1 Answers
My car has one-touch electric windows. Recently, when closing, as it reaches the top the driver's window suddenly goes all the way back down - as if a safety/anti-trapping mechanism has been activated. Now it only seems to move by holding the switch down, i.e. not one-touch.

What could be the cause and how can it be fixed?
Gravatar

Answers

Only 1 answerrss feed

Best Answer

No best answer has yet been selected by c00ky83. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
It's quite possible that the runners have got a bit sticky and the one-touch mode has been deactivated. Try spraying a silicon or PTFE based spray into the window runners to lubricate them. Don't use a WD40 type penetrating spray as this can sometimes swell the rubbers making it worse.
Now press the switch so that the window is fully open, release the switch, then hold it down as if ti open it again.
If this doesn't work try it the other way. Close the window, release the switch, then press it as if you're wanting it to go up again.

Only 1 answerrss feed

Do you know the answer?

Electric windows

Answer Question >>