Donate SIGN UP

Water swelling in laminate bench tops

Avatar Image
Bobster-cyw | 17:57 Tue 15th Jul 2008 | Home & Garden
1 Answers
I've just noticed that my bench top is swelling where it has been joined. All the correct cements etc were used but somehow water has been getting between the join.

I'll try and get some more cement at the weekend and see if I can seal it any further but is there anything else I can do or has the damage already been done now ?
Gravatar

Answers

Only 1 answerrss feed

Best Answer

No best answer has yet been selected by Bobster-cyw. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
I presume the swelling is at the angle joint of an elbow. I fear that the damage has already been done. Most probably the MDF board or if it is an old top chipboard has gotten wet and swollen. If the joint can be completely separated it is sometimes possible to gouge the swollen wood out from the bottom with a router up to 1/4" from under the laminate and fill the straight edged cavity with more MDF, then heat and clamp with a flat board until the formica has cooled and stays in the flat shape. Then the joint can be redone properly. Almost certainly due to original sloppy cutting of joint edges.

Afraid this is a job for a tradesman or a very very handyman. Unless you know someone, the cost would not warrant the repair.

If the top is under two years old and has been installed professionally, you may have some come-back from the manufacturer/installer.

Only 1 answerrss feed

Do you know the answer?

Water swelling in laminate bench tops

Answer Question >>

Related Questions

Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.