Donate SIGN UP

petrol driven hedge trimmer ( fault )

Avatar Image
J.JJ | 20:53 Fri 22nd Jun 2007 | How it Works
3 Answers
I have a petrol driven hedge trimmer. When it is working properly , the blades only cut when the engine revs are increased. My trimmer blades do not operate properly when the revs are increased, can anybody please tell me if there is a simple step that would solve this problem as I really need them.
Gravatar

Answers

1 to 3 of 3rss feed

Best Answer

No best answer has yet been selected by J.JJ. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Sounds like the linkage between the engine and blades is broken.
Or you may get off cheaper if the blades are jammed with debris. Also, the bolts that hold the two blades together may have tightened up, binding the blades. Even only one of the bolts being too tight is enogh to bind the blades.
Try loosening all of the bolts and gently/snugly re-tighten them. While they are loose, remove accumulations of debris and lube the blades with WD-40 or an equivalent product. Do all of this with the lead wire OFF of the spark plug to avoid accidental starting while you are handling the blades!
Question Author
the blades do move but only when you really
rev the engine.
does the cutting action work with some sort of centrifugal clutch mechanism, low revs no cutting, higher revs starts to cut.

1 to 3 of 3rss feed

Do you know the answer?

petrol driven hedge trimmer ( fault )

Answer Question >>

Related Questions

Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.