Donate SIGN UP

No Tv Channels After Roof Work.

Avatar Image
malagabob | 20:59 Fri 06th Oct 2017 | Home & Garden
4 Answers
I have a tv in bedroom connected to an aerial on chimney. Was receiving all normal and free view channels before having roof retiled One of the workers snapped the coax. I had coax connectors and I repaired it . All was working fine.
Went to watch tv that night, after workers had finished and completed roof that afternoon. BBC 1 and 2 had pictures but they were breaking up and pixelating Tried retuning but only 9 tv and a few radio channels being tuned.. I'm thinking the aerial has been moved. Am I correct or is the problem with my coax repair. TIA
Gravatar

Answers

1 to 4 of 4rss feed

Best Answer

No best answer has yet been selected by malagabob. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
It is likely the workmen moved the aerial when they snapped the coax.
It only needs to move a little bit to lose reception.
Question Author
Thanks Eddie51. Should have added, checked reception after my coax repair only checked the one channel BBC1 without going through full list. Gave me impression all was OK.
BBC 1 is the easiest channel to get, so you could get that but lose a lot of the others.
Aerial has probably moved, but also is your connector waterproof?

Any time I retune I use this site to give me a list of channels per mux - then I check that I get a channel from each mux

https://www.terrestrialtv.uk/dtt.cgi?reg=UK.E&;search=DTT&sf=s&by=lcn&;type=VRDIPTSAGHXYZCL&mux=12AbCD6&hist=&data=&col=LnNTMHC&;disp=1&grp=&oair=&agrp=

1 to 4 of 4rss feed

Do you know the answer?

No Tv Channels After Roof Work.

Answer Question >>

Related Questions