Donate SIGN UP

Attaching Interlocking Wood Cladding To Sand And Cement Render

Avatar Image
tandh | 00:27 Mon 05th Sep 2016 | DIY
6 Answers
What is the best way to do this and what nails/ screws should i use?
Gravatar

Answers

1 to 6 of 6rss feed

Best Answer

No best answer has yet been selected by tandh. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
If the cladding is to be horizontal, then fix vertical 25 x 50mm treated battens at 400mm centres.
Fix using 65mm (2 1/2 inch) screws into ordinary red rawlplugs.

How you fix the cladding to the battens will depend on the type of cladding.
Question Author
thanks builder, i'm glad i asked now, i was going to attach the cladding straight onto the wall. this is the cladding,
http://www.wickes.co.uk/Wickes-General-Purpose-Softwood-Cladding-14x94x1800mm-Single/p/128461?CAWELAID=120135120000008780&CAGPSPN=pla&CAAGID=17408399812&CATCI=aud-132456717172:pla-79941661554&utm_source=google&utm_medium=cpc&utm_term=&utm_campaign=Google%20Shopping%20-%20Building%20Materials&tmcampid=&tmad=c&tmplaceref=clTKJDZi&utm_content=sclTKJDZi|pcid|43364522812|pkw||pmt||&;gclid=Cj0KEQjwr7S-BRD96_uw9JK8uNABEiQAujbffOJQj8hdnxtFyv0C35HXWPfFSGT4tx24-HKeMWCMsF4aApyo8P8HAQ
i have used it to make a gate, but i found it does not stay locked in place when you move it around, i was thinking about nailing one onto the batten, then clicking the next on into place and nailing that on, do you think that will work well?
Given that the cladding is only 14mm thick, I'd follow The Builder's advice of attaching battens and then fix the cladding into place using Gripfill type adhesive (solvent free if you wish) applied to the face of the battens. I'm not clear if you are using it in an outdoor situation but nevertheless, many of these tube adhesives ar suitable for outdoor use.

Funnily enough, I've used a few over the years and one of the best is called "Sticks Like ***". Available in Screwfix.
The censor has been at work again. the word should be S, haitch, I and T.
Tandh, for an outdoor application, I would "secret nail".

Pin each piece by nailing carefully in through the top of each piece. i.e. drive each pin at roughly 45 degrees in through the top "tongue".

With care, each nail hole will be completely covered by the next piece of cladding that is set on top of the one you've just nailed.
Question Author
builder you're brilliant, thank you so much, i'm so excited to see how it turns out now

1 to 6 of 6rss feed

Do you know the answer?

Attaching Interlocking Wood Cladding To Sand And Cement Render

Answer Question >>

Related Questions

Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.