Donate SIGN UP

Steamed up windows

Avatar Image
Brownlow | 16:57 Mon 12th Oct 2009 | Interiors
3 Answers
When I bought my home, it didn\'t have double glazing, so I got up on cold mornings to steamed up windows. I addressed the issue by installing secondary double glazing, which consisted of sheets of perspex held on with clips. Problem solved, for just a few quid.
A while back, I decided to have new windows fitted. The new double glazed ones were brilliant, or so I thought. However, the first time we had a cold spell, I got up to steamed up windows, again.
I contacted the people who fitted them and was tiold that this was normal, if th erooms werenn\'t wram enough. I\'d have to turn up the central heating, or open a window to allow the condensation to escape. I couldn\'t believe this; I\'d paid thousands of pounds to have new windows, which were not as good as my old ones
So, I need to know if anyone can explain this situation, or (better still) tell me how to solve the problem.
Gravatar

Answers

1 to 3 of 3rss feed

Best Answer

No best answer has yet been selected by Brownlow. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Question Author
I'm sorry about the last message, as there are a few mistakes. It should have read:
I contacted the people who fitted them and was tiold that this was norma, if the rooms weren''t warm enough. I'd have to turn up the central heating, or open a window to allow the condensation to escape. I couldn't believe this; I'd paid thousands of pounds to have new windows, which were not as good as my old ones
In the absence of other takers, I'll try and explain it.
In many ways secondary double glazing is perfrectly satisfactory. It is just that people don't like it because it doesn't look great and you can't open the (outer) windows without fiddling with the secondary glazing.
Steaming up is caused by moisture in the air in your house being unable to remain as water vapour close to the colder DG surface. It condenses, because colder air is less able to retain the same volume of water vapour as invisible vapour.
As to why your secondary DG worked better than your new, I am struggling to understand. I think it might be due to the perspex inner - itself a better insulator than single glass. What is clear is that the inner surface temperature at the perspex surface face that you achieved must have been higher than that of your new DG.
To solve the problem, I would look very carefully at what causes water in your house, since any DG should be capable of preventing excessive condensation. Even in my well-insulated property, I small misty patch occurs along the bottom on a really cold window - but I assume you are talking dripping water?
So:
Are you using paraffin heaters?
Do you have a shower with an adequate extraction system to the outside?
Ditto question over the hob?
Do you dry the washing over rails in the house?
All of these reasons create large volumes of water vapour in the house. The best solution is to try and cut the amount of such vapour being created in the first place.
I sortrd out the same problem in my kitchen very simply by never boiling anything a saucepan without a lid. I know that the advice is to cook veg with the lid off but honestly you cannot tell the diff apart from the lack of condensation

1 to 3 of 3rss feed

Do you know the answer?

Steamed up windows

Answer Question >>