Is The Flag On The Ab Opening Page A Day...
ChatterBank2 mins ago
Radiator Connection
22 Answers
Wondered what plumbing expertise we had here. I need some information as I'm trying to consider options and work out what's feasible. What I need to know is whether one can get an end pipe connector that is identical to that on a radiator thermostat that I can connect the radiator to.
The background is that I wanted to box in some vertical pipes but it turned out that the radiator was too near to them; and to get sufficient room I needed to move the radiator along the wall.
I had decided to move it about 50 mm, but then an idea struck me. I could avoid drilling more holes in the wall by simply turning the radiator brackets around. This shifted things about 30 mm. Not ideal, but I think probably sufficient.
But just 30 mm means that any new hole in the floorboard for the pipe is rather near it's existing hole, and would possibly break though and make one massive hole. However a further thought has occurred to me that may avoid that.
One option I could try is to replace the floorboard upside-down, which would increase the distance between the holes. The downside being that the pipe would exit a little way from the radiator. I think I need to have the pipe hit the thermostat where it exits and then return the short distance horizontally to the radiator. The thermostat is then automatically acting as a 90⁰ joint.
But looking at the radiator and thermostat it's unclear if one can make a connection as the output of the radiator is similar to a pipe end with 'olive' and a screw nut part behind it, looking for something to screw onto.
But can one get a connection for the pipe that mimics the female connection aspect of the thermostat ? I can't recall seeing one.
Cheers.
The background is that I wanted to box in some vertical pipes but it turned out that the radiator was too near to them; and to get sufficient room I needed to move the radiator along the wall.
I had decided to move it about 50 mm, but then an idea struck me. I could avoid drilling more holes in the wall by simply turning the radiator brackets around. This shifted things about 30 mm. Not ideal, but I think probably sufficient.
But just 30 mm means that any new hole in the floorboard for the pipe is rather near it's existing hole, and would possibly break though and make one massive hole. However a further thought has occurred to me that may avoid that.
One option I could try is to replace the floorboard upside-down, which would increase the distance between the holes. The downside being that the pipe would exit a little way from the radiator. I think I need to have the pipe hit the thermostat where it exits and then return the short distance horizontally to the radiator. The thermostat is then automatically acting as a 90⁰ joint.
But looking at the radiator and thermostat it's unclear if one can make a connection as the output of the radiator is similar to a pipe end with 'olive' and a screw nut part behind it, looking for something to screw onto.
But can one get a connection for the pipe that mimics the female connection aspect of the thermostat ? I can't recall seeing one.
Cheers.
Answers
I "think" I know what you mean OG. Not your fault. One look at these things is worth a thousand words, as they say. Anyway, is this on the right lines?...
13:26 Fri 09th Oct 2020
I "think" I know what you mean OG. Not your fault. One look at these things is worth a thousand words, as they say.
Anyway, is this on the right lines?
https:/
Anyway, is this on the right lines?
https:/
It could be. Looks hopeful. I'm not at my place presently; I was earlier. My concern would be the set length of the thing at 60 mm. If it took up most of the distance anyway, but not all, then I'd be fiddling trying to get another short length of pipe in as well. Or if too long, then the other issue. I'll have to check lengths next time I'm back, thanks. Ideally it'd be very short and let the pipe define the length. In any case, I now know what description to search for :-)
Well got the bit this morning, but it isn't overly clear how it's fitted. No instructions (and the bag was open). Have come away from the workplace, half expecting to have to return it. Sat here, I think I may have figured it out.
The olive must have to go onto the chromed "blank" end, rather than on a copper pipe as one would normally expect, and then connect directly to the thermostatic valve. That then leaves the end with an external screw thread to fit to a copper pipe. It'd only be fittable directly to the radiator if the full extension of 60mm was required since the sliding tube part unthreaded end appears to need to pass through the threaded end and then be swallowed inside the pipe. That's just weird and uninstictive. What odds that it'll be ok ?
I may try it later this week. Trouble is after trying, it won't be returnable any more.
The olive must have to go onto the chromed "blank" end, rather than on a copper pipe as one would normally expect, and then connect directly to the thermostatic valve. That then leaves the end with an external screw thread to fit to a copper pipe. It'd only be fittable directly to the radiator if the full extension of 60mm was required since the sliding tube part unthreaded end appears to need to pass through the threaded end and then be swallowed inside the pipe. That's just weird and uninstictive. What odds that it'll be ok ?
I may try it later this week. Trouble is after trying, it won't be returnable any more.
Latest Posts
Crosswords9 mins ago
News11 mins ago
Horses Galloping Though Central London
News12 mins ago
Crosswords18 mins ago
