Donate SIGN UP

Ceiling Light Being Weird - Any Ideas?

Avatar Image
joggerjayne | 07:25 Mon 17th May 2021 | How it Works
27 Answers
A few days ago, I bought a ceiling light from one of the Moroccan shops in The Lanes.

It's like a chandelier style. Bronze coloured metal, with seven chains. on each chain, there is a multi faceted glass shade. So (this is the relevant bit), seven bulbs altogether.

The wiring seemed really simple. My pal and I gave it a go.

When I took off the old light, there was a plastic circular thing. On the plastic circular thing, there was a plastic strip, with electrical connectors. There were several thick wires coming out of the ceiling, screwed into these electrical connectors.

The old ceiling light just had two wires (the Brown Live wire, and the Blue Neutral wire), screwed into the two outside connectors on the plastic strip.

Looked simple. Sooo ...

The new light also has the same two wires. We attached the wires from the new light in the same way. The new Brown wire, where the old Brown wire had come from. And the new Blue wire, where the old Blue wire had come from.

And it worked. But ... (here's the problem) ...

When I switch the light OFF, one of the bulbs keeps glowing (but very dimly).

If I start to unscrew the glowing bulb, it fades, and a couple of the other bulbs start to glow.

Could it be a wiring problem? Have we done something wrong?

The new light is quite heavy (it took both of us to hold it up). To support the weight, we cut a wire coat hanger, bent it around a piece of wood in the hole in the ceiling, and bent the other end into a hook. We hung the new light from this hook. Could this metal coat hanger be part of the problem? We don't think it was touching against any bare wires.

Any ideas would be appreciated.

J x
Gravatar

Answers

1 to 20 of 27rss feed

1 2 Next Last

Best Answer

No best answer has yet been selected by joggerjayne. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
JJ !!! where ya been ?
can you take a pic and post using postimage or similar..?? builder will see it..may be something to do with a transformer ..since you have no earth wire ????
"We don't think it was touching against any bare wires."

YOU DON'T THINK!!!!

Maybe you should get an electrician in?
My answer would be call in an electrician immediately and dont turn it on again until he arrives!
Question Author
Yo, Minty x

Thanks, guys. I'll get an electrician.
What sort (and rating) of light bulbs were/are fitted to the lights and what type of light switch? It sounds to me as if there is a problem with the light switch (dimmer?) and when turned off it is still passing a small amount of current, sufficient to dimly light the bulb(s).
if it's glowing there must be power in the circuit. Is you light switch a simple on/off switch or a dimmer, I suspect the latter, a small amount of power can get through those. Also try this, remove one bulb and turn it on, if the other bulbs light then it is connected in parallel which explains why the dim lit bulb moves along to the next one when you unscrew it. If you change the switch temporarily to a simple on off one then there should be no power to the bulbs at all when "off".
Question Author
So the bulbs are strange little things. They are like little cylinders, about 5cm tall, and 1.5cm in diameter.

Inside the glass bit of the bulbs, there are rows of little yellow squares.

There doesn’t seem to be any writing on the bulbs.

J x
Give Delboy and Rodney Trotter a ring they have lots of experience.
JJ they are LEDs and take a tiny amount of power, there will be a transformer inside the light somewhere and that can still light them for a short time after the power is off. Do you have a dimmer switch?
11 .18 LOL , Loved that one , it was so funny.
TC/Gully go and troll somewhere else.
The bulbs in the new fitting sound like these:
https://www.ledbulbs.co.uk/products/integral-3w-dimmable-led-g9-2700k-ilg9dc009
What did the old light fitting have?
TTT just trying to had a bit of (sparkle) to the day ahead
^^add
Hiya JJ. I have a theory, but I can't think of a solution though.
LED bulbs I guess?

I've had this once before with ceiling downlights. Your little LEDs take a very small current to light them up. My theory is that you have a case of "Electrical Inductance."
Somewhere within the light fitting, the wires to each bulb cross over one another. This can create a magnetic field which "induces" a current in the wire going to the offending bulb.

Not normally a problem with old-type bulbs that took a bigger current to fire them up. Your bulbs need a minute current to operate.
Not uncommon in cheaper, imported fittings these days, and I can't think of anything to stop it. It's just the way the fitting is made up.

On another point... your brown and blue wires are right, but (I assume the fitting is metal) you should also connect an Earth from the ceiling to the fitting. (Green/Yellow.)
If the fitting should ever "go live", if there is no earth connection and you touch it, there could be no more JJ.

I wish I could be more help.
Question Author
TTT It’s not a dimmer switch, just a normal one.
Question Author
Etch ... you, it’s one of those, but with a small screw thread.
Question Author
Hang on ...

Just reading TB’s post
Question Author
Yikes!

Thanks for the heads up on the Earth wire, TB

J x

1 to 20 of 27rss feed

1 2 Next Last

Do you know the answer?

Ceiling Light Being Weird - Any Ideas?

Answer Question >>

Related Questions

Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.