Donate SIGN UP

Clutch / Fuel Consumption

Avatar Image
Bazile | 18:07 Wed 24th Apr 2013 | Motoring
6 Answers
£160 to repalce a clutch on a Pegeout 307 1300cc -51 plate ( parts and labour )

Is that a fair price or did they see me coming ?


Would a faulty clutch have an adverse effect on fuel consumption ?

I do note a lack of power when going uphill .
Gravatar

Answers

1 to 6 of 6rss feed

Best Answer

No best answer has yet been selected by Bazile. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Seems a fair enough price to me Bazile.
Was the car revving high and going nowhere on hills because the clutch was slipping? That's not good for mpg.
Question Author
There is a sound sometimes like the clutch and gear box are not disengaging ( i think ) , when moving off in first gear and into second gear .

Is that what you mean by slipping ?

A general lack of power when going up inclines
Sounds a steal to me!

Your clutch is a pair of plates that press together and connect the engine to the gearbox. When it gets worn the two plates can slip so the engine revs but the other plate takes a while to catch up with the spinning.

This is often first noticed when you're going up a hill because thats when there's more stress on it. It may be accompanied by a bit of a burning smell.

The problem will get progressively worse

If you have a rev counter you'll see the rev counter go up and slowly come down while the speed remains more or less the same

I don't know the 307 but replacing the clutch will involve taking out some significant componants

On my old MG the whole engine needs to be removed! That costs more than £160! I guess the 307 is a bit easier from the price
That price is good, go for it, make sure they replace the (3) Clutch Plate / Pressure Plate / Thrust Bearing, whilst they are doing the Job, I would get the Cable done at the same time.
A quick scan looks like the parts are half of that so it is a good price.

TWR's point is good but it looks to me like a hydraulic rather than a cable clutch

You might consider asking him to quote you for replacing the slave cylinder at the same time that is the piston that engages and disengages the clutch - the part's about £25 but if it failed shortly after it'd probably cost a lot more
Question Author
Thanks all

1 to 6 of 6rss feed

Do you know the answer?

Clutch / Fuel Consumption

Answer Question >>

Related Questions

Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.