does anyone know the codes or instructions for a COMMTEL control freak ( Remote Control ) please ?

Dear good AB'er does anyone know the codes or instructions for a COMMTEL control freak ( Remote Control ) please ? thanks good AB'ers GL.
00:40 Tue 18th Dec 2007
 
Best Answer


No best answer has yet been selected by grahamlong. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

1 to 2 of 2

You don't actually need them, The remote can be made manually rotate through all the codes it contains until you find the right one. Here is how.

Turn on the device in question, say TV and select it on the device mode keys at the top of the remote

Press and hold P+ and Vol- at the same time until the red light stays on, takes about 2 seconds. Enter the following relevant code using the numeric buttons, depending on the device you are setting up.

Device TV VCR SAT CTV DVD
Search Code 0001 0002 0003 0004 0005

Press the device select button again and then hold down the p+ and Vol- keys again until the red light stays on.

Using the off button on the control press it over and over until the device switches off, you have then found the device code for it.

Press P+ and Vol- again to lock the code in place. Each time you press the off button while doing this the remote moves on ot another code so don't go too quickly. If your device does not use infrared off then press another function such as play along with the off button on the reomte and wait for that to activate.

Good luck.

1 to 2 of 2

Latest posts