How it Works

Petrol Lawnmowers...

So, the sun is shining and I deide to cut the grass, get the mower out and give the string (excuse my ignorance) a good pull to get the engine started, and then the string breaks and retracts itself back into the engine. What do I do now, can these be replaced, if so how are they attached to the mower / engine and where can I get a replacement from...? cheers

ck1 Mon 13/06/05 10:32

<< Previous

Next >>

Subscribe to question

Post an Answer

Clanad
Mon 13/06/05
13:23

This can be a daunting task... but it can be done if you are careful. The entire device, if mounted on the top of the engine, consists of a wheel with the rope attached, but most importantly, a coil spring to retract the rope once it's pulled. After locating the screws that hold the device on and after loosening them, be sure to hold the device securely while removing to prevent the spring from, well, sproiiiinging, so to speak. After replacing the rope, and rewinding it, carefully replace the entire device back on the engine. Check here for one model of engine

http://chuck.kichline.com/fixit/mowers/rope.html

It's a good idea to make sure any On/Off switch for the engine is securely off to prevent any inadvertent starting while you're working with it... Good Luck!

ck1
Mon 13/06/05
14:12

Question Author

Fantastic stuff, thanks Clanad, I know what ill be doing this weekend now anyway!!

Post an Answer

Submit the above question and answers

add to del.icio.us	add to digg	add to furl
add to reddit	add to Technorati	add to Blinklist
add to StumbleUpon	add to squidoo	add to ma.gnolia
add to Cocomment	add to Netscape	add to Fark